How to Measure Your Dog for The OTTO Harness (Lambwolf Collective)

HOW TO MEASURE

*Please use a soft measuring tape for this*

If you don't have one at hand, use a leash as an alternative and use a pencil to mark on the leash, then measure the length of the marked leash.

1. Measure your pet in standing position (not sitting or laying down). Place the tape under the girth of your standing pet.

2. Bring the tape up to the back of your pet to form a cross. One side should be the end of the tape.

3. The longer end will wrap around the neck of your pet.

4. Bring the tape up to the back of your pet to meet the other end of the tape.

5. The tape should mimic the harness on your pet's body and therefore should be as tight as you would want the harness to be on your pup. 

Do not measure loosely with the floof for a more accurate and secure fit.

* Note: we would suggest having the tape to be right after the front legs for it to be escape-proof. However for some breeds, the fitting might be better. It all depends on the body type of your pup.

6. If you have followed this guide step-by-step, your tape should end at where you started: at the middle of the cross.

Take the measurement and match it to the size chart. Measure twice, order once. We do not accept returns of a mistaken size.